7 Steps To Install a Pellet Torch
Nov 26, 2024
The process of installing a pellet torch is very simple and can be completed in just 7 steps. The premise is that each link needs to be carefully operated to ensure the safety and efficiency of the stove. So, what are the specific 7 steps? Let's take a look together!
Installation Steps
1. Check The Equipment
When we receive the pellet stove, open the package and make sure all parts are intact. The main parts that need to be checked include the following parts:
- Glass tube: Check whether the glass tube has cracks or damage;
- Flue: Check whether there are cracks at the connection between the chimney and the flue,
- Base: Whether the base is flat and stable.
If you encounter any damage, you can contact us immediately!
2. Preparation
Before installing the pellet rocket stove, make sure all tools and parts are ready.
- Tools: Common tools include screwdrivers, wrenches, etc.
- Parts: The pellet stoves purchased from us have complete parts. For example, the furnace body, glass tube, flue, furnace bottom, chimney, and connecting screws and brackets.
3. Install The Base
First install the base part of the pellet stove. Fix the base to the installation position with screws. Make sure each bolt is tightened during installation to prevent the base from loosening.
4. Install The Main Furnace Body
- Place the furnace body on the base: align the furnace body with the fixing point of the base to ensure that the furnace body is firmly connected to the base.
- Fix with bolts and brackets: Use bolts to fix the furnace body to the base to ensure that there is no looseness at the connection.
- Check alignment: During the installation process, it is necessary to ensure that the connection between the furnace body and the base is aligned to avoid subsequent problems caused by improper installation.
5. Installation Of Glass Tubes
The glass tube is an important part of the rocket stove. It not only affects the appearance, but also plays a vital role in the thermal efficiency and smoke exhaust effect of the stove body.
- Align the glass tube with the installation position: Ensure that the glass tube is completely aligned with the connection between the furnace body.
- Fix the glass tube: Since there is a hole on the furnace body that can just accommodate the glass tube, it plays the role of fixing the glass tube.
- Check the sealing: After the glass tube is installed, check whether there is looseness and air leakage at the connection.
6. Install The Furnace Cap
The furnace cap can effectively seal the furnace body, prevent the leakage of fuel and heat, and maintain the overall sealing of the furnace. In addition, the design of the furnace cap also includes some safety protection functions. If it encounters rainy and snowy weather, the furnace cap can ensure the normal burning of the flame.
The dimensions of the furnace cap are all precisely measured, and you only need to tighten the furnace cap and the glass tube.
7. Inspection And Testing
After installation, be sure to conduct a comprehensive inspection and debugging to ensure the normal operation of the pellet rocket stove:
- Check the connection between the furnace body and the base: Make sure all bolts are tightened and the connection between the furnace body and the base is not loose.
- Check the glass tube: Make sure the glass tube is firmly installed and well sealed.
- Test the combustion system: Add biomass pellet fuel, ignite the fuel, check the combustion, and ensure that the firepower is stable and the combustion is complete.
Use And Maintenance:
After the pellet rocket stove is installed and debugged, we need to understand some basic use and maintenance knowledge:
Use pellets: Choose suitable biomass pellet fuel and avoid using unqualified fuel, otherwise it may affect the combustion effect and the life of the furnace body.
Regular cleaning: Clean the furnace body and flue regularly to prevent dust accumulation and maintain a good exhaust effect.
Check the glass tube: Check the glass tube regularly for cracks or wear, and replace the problematic parts in time.
We are a professional pellet stove manufacturer. You don't need to worry about the installation of the pellet stove purchased from us. Our business staff will follow up throughout the process. If you have any questions, our business staff will reply to you in time and solve the problem for you.
