Pellet Torch Fuel Selection Guide: How To Choose The Right Pellet Fuel

Pellet Torch is gradually entering the market. The design of the glass tube not only makes the combustion process more transparent, so that we can observe the combustion state more intuitively, but also effectively improves the combustion efficiency, reduces smoke emissions, and improves environmental performance. In order to maximize the use benefits of Pellet Torch, choosing the right pellet fuel becomes a crucial factor. This article will mainly introduce what factors need to be considered when choosing pellets?

What Is a Pellet Torch?

The pellet torch, also known as the pellet rocket stove, is an efficient and environmentally friendly biomass combustion equipment. It uses advanced combustion technology to achieve efficient heating through high-temperature and high-speed combustion of biomass pellet fuel. The name of the rocket stove comes from its unique combustion structure and efficient smoke exhaust system. The shape of the flame produced during combustion is similar to the tail flame of a rocket, and the combustion process is efficient and clean.

The design of the pellet rocket stove focuses on making full use of the energy of the fuel, and by optimizing the combustion chamber structure and air flow, the fuel is fully burned and the energy is maximized.

What Is Pellet Fuel?

Pellet fuel is a solid fuel obtained by compressing and molding organic matter (usually wood, crop waste or other biomass). These pellets are usually cylindrical or long in shape, with a high energy density, making them easy to store and transport.

Pellet fuels are usually suitable for modern pellet torches, pellet stoves, boilers and other equipment. They have the characteristics of low emissions, high calorific value and sustainability.

Classification Of Pellet Fuels:

There are many types of pellet fuels, which are mainly classified according to their raw materials, production processes and combustion performance. Common pellet fuels include:

Wood pellet fuel: pellet fuels formed by compression of wood chips, wood chips, wood powder, etc. Hardwoods such as pine, oak and birch are usually used because of their high combustion efficiency, which is suitable for most pellet torches.
Crop pellet fuel: including straw pellets, corn cob pellets, straw pellets, etc. These pellet fuels are widely available and low in cost, but their calorific value and combustion efficiency may be slightly lower than wood pellets.
Biomass mixed pellet fuel: pellet fuel made by mixing wood chips and crop residues. This type of fuel has cost advantages, but may affect the stability of combustion.
Waste pellet fuel: Some recycled waste such as paper, plastic and organic waste can be converted into pellet fuel. These fuels usually have poor combustion performance and may contain harmful chemicals, produce more ash and pollutants. Therefore, special care should be taken when using waste pellet fuel.

Why Use Pellet Fuel?

Compared with traditional coal or gas systems, pellet fuel has the following advantages:

High efficiency and energy saving: Pellet fuel usually has a higher energy density, which can achieve more efficient heat energy release.
Strong environmental protection: Pellet fuel has less carbon dioxide emissions and does not release a large amount of harmful gases when burned, so it is considered a green and environmentally friendly energy option. Especially wood pellet fuel, because it comes from renewable resources, it hardly increases the concentration of carbon dioxide in the atmosphere during combustion.
Easy to store and transport: Pellet fuel is small in size and light in weight, easy to store and transport, and more convenient than traditional wood or coal.
Renewability: Most pellet fuels come from agricultural or forestry waste and are renewable resources.
Low maintenance: Compared with traditional fuels, pellet fuel has a lower ash content, which means that when using a pellet torch, the frequency of carbon deposition and cleaning the stove is relatively low, reducing maintenance costs.

How To Choose The Right Pellet Fuel?

Choosing the right pellet fuel is the key to ensuring the efficient and safe operation of the Pellet Torch. Here are a few important factors to consider when choosing pellet fuel.

1.Calorific Value:

The calorific value is an important indicator to measure the combustion efficiency of pellet fuel. Pellets with higher calorific values can provide more heat energy, thereby reducing fuel consumption and improving energy utilization. The calorific values of common pellet fuels are as follows:

Wood pellets: usually have a higher calorific value, about 18-22 MJ/kg.
Crop pellets: have a lower calorific value, about 15-18 MJ/kg.
Waste pellets: have a lower calorific value, usually less than 15 MJ/kg.

When choosing fuel, you should give priority to fuels with higher calorific values. This will not only ensure the efficient operation of the equipment, but also save fuel costs in long-term use.

2.Moisture Content

Pellets with high moisture content require more heat to evaporate the moisture, which means lower combustion efficiency. The ideal pellet fuel moisture content should be less than 10%. If the moisture content is higher, the combustion may not be complete, and more smoke and exhaust gas will be produced.

3.Pellet Size And Shape

The diameter of the pellet is usually between 6-8 mm, and the length should be controlled between 10-30 mm. Pellets that are too large or too small may cause incomplete combustion, block the feed system, and even cause equipment failure.

4.Ash Content

Ash content is the inorganic matter left after the fuel is burned. Pellets with high ash content will produce more residue after combustion, which will not only affect the combustion effect, but also may cause carbon deposition and blockage of the pellet torch. The ideal pellet fuel ash content should be less than 1-3%.

5.Purity

Pellets with higher purity usually burn more completely and emit less harmful substances. It is recommended to choose certified, high-quality pellet fuels and avoid using fuels with too many chemicals, impurities or additives.

How To Ensure The Quality Of Pellet Fuel?

To ensure that the selected pellet fuel meets the requirements, we can take the following methods:

Choose A Reputable Supplier

When purchasing pellet fuel, you should choose suppliers with a good reputation and certification. Well-known fuel suppliers usually provide high-quality pellet fuel, which has undergone strict quality control and standard certification to ensure that its calorific value, moisture content, ash content and purity meet the requirements.

Check And Store Fuel Regularly

In order to ensure the stability and efficiency of pellet fuel during use, the correct storage method is very important. Pellet fuel should be stored in a dry and ventilated environment, avoiding moisture and direct exposure to rain, because wet fuel will cause its moisture content to be too high, affecting the combustion effect. At the same time, check the stored fuel regularly to ensure that it is not affected by insect pests or other contaminants.

Choosing the right pellet fuel is a key factor in ensuring the efficient operation and long-term stable use of Pellet Torch. By understanding the types, characteristics and selection criteria of pellet fuel, you can choose the most suitable fuel according to your needs and environment. Before buying pellet fuel, you first need to have a pellet stove. You can browse our pellet stoves. (https://www.jblbbq.com/patio-hetaer/pellet-heater/)